1x W-TEC All Terrain 18" alloy wheel suitable for Ford Ranger (2012-2018)

Drawer system suitable for Ford Ranger (2012-2022) double cabWhich Ford Ranger driver doesn't know it?There is enough space in the load area to transport a lot of things, but either they are flying back and forth on the load area or they are lying behind the driver's cab and you simply can't reach them from behind.Our drawer system organises all the chaos. It consists of two different large drawers. These can each be subdivided so that you can find even the smallest parts easily and quickly.Important! Before fitting our drawer system, the plastic tray must be removed from the Ranger. Our drawer system can only be fitted without the plastic tray.Details:extremely robust plastictwo drawers with roller bearingsMounting on existing attachment points on the Ford RangerGerman assembly instructionsLoad capacity per drawer approx. 70 kg (evenly distributed)Load capacity on the drawer system approx. 400 kgLockableSuitable for the following vehicles:Manufacturer: Ford Motor CompanyTrade name: Ford RangerVehicle type: 2ABYear of manufacture: 2012-2022Cab type: only for double cabWith EC-BE-No.: e11*2007/46*0154*.., e5*2007/46*0080*..For 40 years we have been offering off road accessories with service and company headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Only suitable if the original cabin protection / styling bar is removed!Rollcover specially designed to fit your vehicle. Extremely resistant and durable. So you not only secure your cargo, but also protect the loading area from the weather at the same time. The cover is designed so that even thieves have no chance. When the cargo cover is locked, there is no way for thieves to steal the cargo.Another advantage of the rollcover is the reduction of air resistance. Turbulence is greatly reduced. This can also lead to a reduction in fuel consumption.Here are the advantages at a glance:100% waterproof and weather resistant in rain, snow and frostLockable (no extra key needed)No loss of storage space - all panels can be rolled up overrailWith the cover closed, fuel consumption may be reduced due to aerodynamicsMade of solid hard composite materialThe upper layer is made of vinyl, the lower layer is made of aluminumThe panels cannot crack, rust, bend, break, rot or wear outEasy to install and remove - no drilling requiredIncl. mounting material + illustrated German mounting instructionsNo registration requiredSuitable for the following vehicles:Manufacturer: FordTrade name: Ranger (4WD), Ranger (Raptor 4WD)Vehicle type: 2ABYear of construction: 2012-2022With EC-BE No.: e11*2007/46*0154*.., e5*2007/46*0080*.., e11*2007/46*0154*.. ab NT 18For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

To give the finishing touch to the look and performance of your vehicle, the Eibach Pro-Lift kits have been developed. Give your vehicle a cross feel with standard comfort. The additional ground clearance of up to 30mm invite you to excursions off the tarred road.Suitable for the following vehicles:Car manufacturer: FordName: Ranger(4WD)Type : 2ABYear of construction: 04/2011 - 12/2018ETG-No : e11*2007/46*0154*..For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

To give the final touch to the look and performance of your vehicle,the Eibach Pro-Lift kits have been developed. Give your vehicle cross feeling with series comfort. The extra ground clearance of up to 30mm invite excursions off the paved road.The Bilstein B6 shock absorbers are the ideal gas pressure dampers for those who do not want to compromise even under increased load. Neither in performance nor in comfort. They harmonize wonderfully with the Eibach Eibach Pro-Lift kits and improve the driving characteristics in every situation. Heavy cargo transport by car or trailer, or bad roads in general, are a challenge for shock absorbers. The yellow BILSTEIN B6 shock absorber offers improved standard replacement for such high demands. The combination with Eibach height adjustment provides improved vehicle dynamics and a comfortable ride on and off the road.Vehicle:Car manufacturer: FordName: Ranger(4WD)Type : 2ABYear of construction: 04/2011 - 12/2018ETG-No : e11*2007/46*0154*..For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Set of 2 black covers for the front headlights. Suitable for all models. Made of high quality black ABS plastic. Easy installation, the covers are simply glued on.Mounting:the covers are glued directly to the headlightsthe surfaces on the vehicle for mounting must be smooth, thoroughly cleaned and free of greasethe application surface must be warm. A minimum temperature of 15°C is requiredafter peeling off the backing film, the surround must be pressed for approx. 1 minute with high and uniform pressure against the surfacewe recommend that you let the vehicle stand for at least 6 hours after installationthe final strength of the glued areas is reached only after 48 hoursplease do not wash the vehicle for at least 48 hoursWe have been providing off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Set of 2 black covers for the taillights. Suitable for all models. Made of high quality black ABS plastic. Easy installation, the covers are simply glued on.Mounting:the covers are glued directly to the headlightsthe surfaces on the vehicle for mounting must be smooth, thoroughly cleaned and free of greasethe application surface must be warm. A minimum temperature of 15°C is requiredafter peeling off the backing film, the surround must be pressed for approx. 1 minute with high and uniform pressure against the surfacewe recommend that you let the vehicle stand for at least 6 hours after installationthe final strength of the glued areas is reached only after 48 hoursplease do not wash the vehicle for at least 48 hoursWe have been providing off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

To add the finishing touches to the look and performance of your vehicle, Eibach Pro-Spacers have been developed. Give your vehicle a wider, more stable track - quickly and easily. Wheel spacers are the ideal addition when the standard or accessory wheel lacks the final visual kick. With the matching Eibach Pro-Spacer, your vehicle gets an even sportier look because the wheels and tyres really fill out the wheel arches this way. The precise adjustment of the track width not only improves the appearance of your vehicle, but also optimises the handling and the rolling tendency.Suitable for the following vehicles:Manufacturer: Ford (D) / 8566Description: Ranger Single- und Doublecabine (Rear and all-wheel drive)Type: 2AWYear of construction: 01/2005-07/2012ETG-No.: K 272*.., e1*2007/46*0394*..Suitable for tyres -rim size - press-in depth in mm wheel/total:205/75 R145,5 x 14+ 40 / + 19205/75 R145,5 x 14+ 35 / + 14205/70 R156 x 15+ 40 / + 19215/70 R156,5 x 15+ 20 / - 1235/75 R156,5 x 15+ 25 / + 4205 R166 x 16+ 40 / + 19205 R166 x 16+ 35 / + 14265/70 R157,5 x 15+ 15 / - 6245/70 R167 x 16+ 10 / - 11255/60 R187,5 x 18+ 5 / - 16 Simply use the help video to determine the correct dimensions and then order the appropriate wheel spacers:You can see the correct installation of the wheel spacers here:For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

To add the finishing touches to the look and performance of your vehicle, Eibach Pro-Spacers have been developed. Give your vehicle a wider, more stable track - quickly and easily. Wheel spacers are the ideal addition when the standard or accessory wheel lacks the final visual kick. With the matching Eibach Pro-Spacer, your vehicle gets an even sportier look because the wheels and tyres really fill out the wheel arches this way. The precise adjustment of the track width not only improves the appearance of your vehicle, but also optimises the handling and the rolling tendency.Suitable for the following vehicles:Manufacturer: Ford (D) / 8566Description: Ranger Single- und Doublecabine (Rear and all-wheel drive)Type: 2AWYear of construction: 01/2005-07/2012ETG-No.: K 272*.., e1*2007/46*0394*..Suitable for tyres -rim size - press-in depth in mm wheel/total:205/75 R145,5 x 14+ 40 / + 10205/75 R145,5 x 14+ 35 / + 5205/70 R156 x 15+ 40 / + 10215/70 R156,5 x 15+ 20 / - 10235/75 R156,5 x 15+ 25 / -5205 R166 x 16+ 40 / + 10205 R166 x 16+ 35 / + 5265/70 R157,5 x 15+ 15 / - 15245/70 R167 x 16+ 10 / - 20Please understand that we only take back new and unassembled goods.Simply use the help video to determine the correct dimensions and then order the appropriate wheel spacers:You can see the correct installation of the wheel spacers here:For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Bullbar made of robust, highly polished stainless steel tube with a oval diameter of 89mm. Manufactured according to the current EU guidelines for pedestrian protection. Thanks to the EC type approval included in the scope of delivery, the bullbar don´t need to be entered in the vehicle documents. The document only has to be carried.Suitable for the following vehicles:Manufacturer: Ford Motor CompanyTrade name: Ford RangerVehicle type: 2ABWith EC-BE-No.: e11*2007/46*0154*...For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Bullbar made of robust, black powder-coated steel tube with a oval diameter of 89mm. Manufactured according to the current EU guidelines for pedestrian protection. Thanks to the EC type approval included in the scope of delivery, the bullbar don´t need to be entered in the vehicle documents. The document only has to be carried.Suitable for the following vehicles:Manufacturer: Ford Motor CompanyTrade name: Ford RangerVehicle type: 2ABWith EC-BE-No.: e11*2007/46*0154*...For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Bullbar made of robust, highly polished stainless steel tube with a oval diameter of 89mm. Manufactured according to the current EU guidelines for pedestrian protection. Thanks to the EC type approval included in the scope of delivery, neither the bullbar nor the skidplate need to be entered in the vehicle documents. The document only has to be carried.Suitable for the following vehicles:Manufacturer: Ford Motor CompanyTrade name: Ford RangerVehicle type: 2ABWith EC-BE-No.: e11*2007/46*0154*...For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Bullbar made of robust, black powder-coated steel tube with a oval diameter of 89mm. Manufactured according to the current EU guidelines for pedestrian protection. Thanks to the EC type approval included in the scope of delivery, neither the bullbar nor the skidplate need to be entered in the vehicle documents. The document only has to be carried.Suitable for the following vehicles:Manufacturer: Ford Motor CompanyTrade name: Ford RangerVehicle type: 2ABWith EC-BE-No.: e11*2007/46*0154*...For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Bullbar made of robust, highly polished stainless steel tube with a diameter of 76mm. Manufactured according to the current EU guidelines for pedestrian protection. Thanks to the EC type approval included in the scope of delivery, the bullbar don´t need to be entered in the vehicle documents. The document only has to be carried.Suitable for the following vehicles:Manufacturer: Ford Motor CompanyTrade name: Ford RangerVehicle type: 2ABWith EC-BE-No.: e11*2007/46*0154*...For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Bullbar made of robust, black powder-coated steel tube with a diameter of 76mm. Manufactured according to the current EU guidelines for pedestrian protection. Thanks to the EC type approval included in the scope of delivery, the bullbar don´t need to be entered in the vehicle documents. The document only has to be carried.Suitable for the following vehicles:Manufacturer: Ford Motor CompanyTrade name: Ford RangerVehicle type: 2ABWith EC-BE-No.: e11*2007/46*0154*...For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Bullbar made of robust, highly polished stainless steel tube with a bulky diameter of 76 mm. Manufactured in accordance with the current EU guidelines on pedestrian protection. Thanks to the EC type approval included in the delivery, the bullbar does not have to be entered in the vehicle documents. The document only needs to be carried.Suitable for the following vehicles:Manufacturer: Ford Motor CompanyTrade name: Ford RangerVehicle type: 2ABYear of construction: 2012-2022With EC-BE-No.: e11*2007/46*0154*...,  e5*2007/46*0080*..For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Bullbar made of robust, black powder-coated stainless steel tube with a bulky diameter of 76 mm. Manufactured in accordance with the current EU guidelines on pedestrian protection. Thanks to the EC type approval included in the delivery, the bullbar does not have to be entered in the vehicle documents. The document only needs to be carried.Suitable for the following vehicles:Manufacturer: Ford Motor CompanyTrade name: Ford RangerVehicle type: 2ABYear of construction: 2012-2022With EC-BE-No.: e11*2007/46*0154*...,  e5*2007/46*0080*..For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

The must-have for every pickup driver. With our practical pickup truck bed drawer we offer you the possibility to load your pickup truck professionally and to transport your cargo safely.Made of sturdy ABS plastic, the drawer is mounted on a very stable sliding platform and can be loaded with up to max. 250kg of transported goods. The loading platform drawer is already fully assembled, only the screw connection to the vehicle (drilling required) must still be carried out.The corresponding assembly material is included in the delivery, as well as a German, illustrated assembly instruction. Even under full load, the drawer is easy to operate. It can be pulled out up to 2/3 and has three safety catches. The transported goods can be secured to the six lashing eyes provided on the drawer.Details:Universal, extendable loading platformRobust ABS plastic tray with 6 additional lashing eyesLoadable up to 250kgExtendable up to 2/3 - three safety latchesSupplied pre-assembledAdditional holes are required for assemblyincl. assembly material + illustrated, German assembly instructionsWe have been providing off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

The must-have for every pickup driver. With our practical pickup loading platform drawer we offer you the possibility to load your pickup professionally and to transport your cargo safely.The drawer, made of robust aluminum checker plate, is mounted on a very stable sliding platform and can be loaded with up to max. 250 kg of transported goods. The loading platform drawer is already fully assembled, only the screw connection to the vehicle (drilling required) must still be carried out.The corresponding assembly material is included in the scope of delivery, as are German, illustrated assembly instructions. Even under full load, the drawer is easy to operate. It can be pulled out up to 2/3 and has two safety catches. The transported goods can be secured to the six lashing eyes available on the drawer.Details:Universal, extendable loading platformRobust aluminum checker plate tray with 6 additional lashing eyesLoadable up to 250kgExtendable up to 2/3 - two safety latchesSupplied pre-assembledAdditional holes are required for mountingincl. assembly material + illustrated, German assembly instructionsFor 40 years we have been offering off road accessories with service and company headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Only fits Ranger models Wildtrak, Thunder, Stormtrak & Raptor (2016-2022) with original sport bar & mountain top blind (also electric).You want to remove the original styling bar, but do not want to do without the original roll cover? Then we have the perfect solution for you with this mounting kit. Simply remove the roll bar and the roll cover, mount our vehicle-specific rail system and then attach the rollcover again. In addition, you would also have the option to attach a roll bar from our range.Especially for the Ford Ranger & Raptor, which are delivered with the original rollcover, we have developed a mounting kit, which makes it possible to combine our rollbar with the factory installed Mountain Top rollcover. This requires additional drilling on the tail lift.Suitable for the following vehicles:Manufacturer: FordTrade name: Ranger (4WD), Ranger (Raptor 4WD)Vehicle type: 2ABModels: Wildtrak, Thunder, Stormtrak, RaptorYear of construction: 2016-2022With EC-BE No.: e5*2007/46*0080*.., e11*2007/46*0154*.. ab NT 18For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Only fits Ranger models Wildtrak, Thunder, Stormtrak & Raptor (2016-2022) with original sport bar & mountain top blind (also electric). You want to remove the original roll bar and use our roll bar, but do not want to do without the original Mountain Top roll cover? Then we have the perfect solution for you with this mounting kit. Simply remove the roll bar and the roll cover. Then mount our vehicle-specific rail system and our roll bar and then reattach the roll cover to it.  Rollcover mounting rails: Especially for the Ford Ranger & Raptor, which are delivered with the original Mountain Top Rollcover, we have developed this mounting set, which makes it possible to combine our rollbar with the factory installed Mountain Top Rollcover. This requires additional holes to be drilled on the tail lift.Vehicle specific double tube roll bar with grille. Solid, highly polished stainless steel tube with a beefy diameter of 76mm.TÜV parts certificate:Our roll bar is delivered with a TÜV parts certificate. Thus, the required registration is no longer a problem.Suitable for the following vehicles:Manufacturer: FordTrade name: Ranger (4WD), Ranger (Raptor 4WD)Vehicle type: 2ABModels: Wildtrak, Thunder, Stormtrak, RaptorYear of construction: 2016-2022With EC-BE No.: e5*2007/46*0080*.., e11*2007/46*0154*.. ab NT 18For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

only suitable for vehicles with double cab, original sport bar & mountain top roll cover You want to remove the original roll bar and use our roll bar, but do not want to do without the original Mountain Top roll cover? Then we have the perfect solution for you with this mounting kit. Simply remove the roll bar and the roll cover. Then mount our vehicle-specific rail system and our roll bar and then reattach the roll cover to it.  Rollcover mounting rails: Especially for the Ford Ranger & Raptor, which are delivered with the original Mountain Top Rollcover, we have developed this mounting set, which makes it possible to combine our rollbar with the factory installed Mountain Top Rollcover. This requires additional holes to be drilled on the tail lift.Vehicle specific double tube roll bar with grille. Solid, black powder coated stainless steel tube with a beefy diameter of 76mm.TÜV parts certificate:Our roll bar is delivered with a TÜV parts certificate. Thus, the required registration is no longer a problem.Suitable for the following vehicles:Manufacturer: FordTrade name: Ranger (4WD), Ranger (Raptor 4WD)Vehicle type: 2ABYear of construction: 2016-2022With EC-BE No.: e5*2007/46*0080*.., e11*2007/46*0154*.. ab NT 18For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

only suitable for vehicles with double cab, original sport bar & mountain top roll cover You want to remove the original roll bar and use our roll bar, but do not want to do without the original Mountain Top roll cover? Then we have the perfect solution for you with this mounting kit. Simply remove the roll bar and the roll cover. Then mount our vehicle-specific rail system and our roll bar and then reattach the roll cover to it.  Rollcover mounting rails: Especially for the Ford Ranger Raptor, which are delivered with the original Mountain Top Rollcover, we have developed this mounting set, which makes it possible to combine our rollbar with the factory installed Mountain Top Rollcover. This requires additional holes to be drilled on the tail lift.Extremely robust, black textured roll bar in unmistakable "Black Stealth" look. The massive, beefy tubes with a huge diameter of 76 mm, the additional mash plates with a thickness of 3 mm and the luggage basket offer your vehicle a brute look. The luggage basket, which can also be mounted only optionally, allows a maximum load of 65 kg. TÜV parts certificate:Our roll bar is delivered with a TÜV parts certificate. Thus, the required registration is no longer a problem.Suitable for the following vehicles:Manufacturer: FordTrade name: Ranger (4WD), Ranger (Raptor 4WD)Vehicle type: 2ABYear of construction: 01/2019-2022With EC-BE No.: e11*2007/46*0154*.. ab NT 18For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

only suitable for vehicles with double cab, original sport bar & mountain top roll cover You want to remove the original roll bar and use our roll bar, but do not want to do without the original Mountain Top roll cover? Then we have the perfect solution for you with this mounting kit. Simply remove the roll bar and the roll cover. Then mount our vehicle-specific rail system and our roll bar and then reattach the roll cover to it.  Rollcover mounting rails: Especially for the Ford Ranger & Raptor, which are delivered with the original Mountain Top Rollcover, we have developed this mounting set, which makes it possible to combine our rollbar with the factory installed Mountain Top Rollcover. This requires additional holes to be drilled on the tail lift.Extremely robust, black textured roll bar in unmistakable "Black Stealth" look. The massive, beefy tubes with a huge diameter of 76 mm, the additional mash plates with a thickness of 3 mm and the luggage basket offer your vehicle a brute look. The luggage basket, which can also be mounted only optionally, allows a maximum load of 65 kg. TÜV parts certificate:Our roll bar is delivered with a TÜV parts certificate. Thus, the required registration is no longer a problem.Suitable for the following vehicles:Manufacturer: FordTrade name: Ranger (4WD)Vehicle type: 2ABYear of construction: 01/2016-2022With EC-BE No.: e5*2007/46*0080*.., e11*2007/46*0154*.. ab NT 18For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Vehicle specific double tube roll bar with grid to protect the driver's cab. Solid, highly polished stainless steel tube with a beefy diameter of 76 mm. Easy mounting on the loading sill -, so you have no loss of cargo area volume - additional drillings are necessary. The specially angled mounting bracket allows the use of our folding cargo cover. Not compatible with roll covers or underrail cargo area covers!New version!Please note that the pictures of the rollbar on the vehicle are the old version. The pictures of the item itself show the new, current version. The side cover has a new design.TÜV parts certificate:Our roll bar is delivered with a TÜV parts certificate. Thus, the required registration is no longer a problem.Suitable for the following vehicles:Manufacturer: FordTrade name: Ranger (4WD), Ranger (Raptor 4WD)Vehicle type: 2ABYear of construction: 2012-2022With EC-BE No.: e5*2007/46*0080*.., e11*2007/46*0154*.. ab NT 18For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Vehicle specific double tube roll bar with grid to protect the driver's cab. Solid, highly polished stainless steel tube with a beefy diameter of 76 mm. Easy mounting on the loading sill -, so you have no loss of cargo area volume - additional drillings are necessary. Not compatible with Hard Trifold covers or roll !TÜV parts certificate:Our roll bar is delivered with a TÜV parts certificate. Thus, the required registration is no longer a problem.Suitable for the following vehicles:Manufacturer: FordTrade name: Ranger (4WD), Ranger (Raptor 4WD)Vehicle type: 2ABYear of construction: 2012-2022With EC-BE No.: e5*2007/46*0080*.., e11*2007/46*0154*.. ab NT 18For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Vehicle specific double tube roll bar with grid to protect the driver's cab. Solid, black powder coated steel tube with a beefy diameter of 76 mm. Easy mounting on the loading sill -, so you have no loss of cargo area volume - additional drillings are necessary. The specially angled mounting bracket allows the use of our folding cargo cover. Not compatible with roll covers or underrail cargo area covers!New version!Please note that the pictures of the rollbar on the vehicle are the old version. The pictures of the item itself show the new, current version. The side cover has a new design.TÜV parts certificate:Our roll bar is delivered with a TÜV parts certificate. Thus, the required registration is no longer a problem.Suitable for the following vehicles:Manufacturer: FordTrade name: Ranger (4WD), Ranger (Raptor 4WD)Vehicle type: 2ABYear of construction: 2012-2022With EC-BE No.: e5*2007/46*0080*.., e11*2007/46*0154*.. ab NT 18For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Vehicle specific double tube roll bar with grid to protect the driver's cab. Solid, black matt powder coated steel tube with a beefy diameter of 76 mm. Easy mounting on the loading sill -, so you have no loss of cargo area volume - additional drillings are necessary.Not compatible with Hard Trifold covers or roll !You will find a suitable roll bar for vehicles with our load compartment cover below the text!TÜV parts certificate:Our roll bar is delivered with a TÜV parts certificate. Thus, the required registration is no longer a problem.Suitable for the following vehicles:Manufacturer: FordTrade name: Ranger (4WD), Ranger (Raptor 4WD)Vehicle type: 2ABYear of construction: 2012-2022With EC-BE No.: e5*2007/46*0080*.., e11*2007/46*0154*.. ab NT 18For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Unsere 4" Side Shooter LED Lightbar ist ein leistungsstarker Zusatzscheinwerfer mit ECE R149 Zulassung als Fernscheinwerfer. Durch seine kompakte Bauweise ist der kleine LED Würfel vielseitig einsetzbar.Somit sorgt der Scheinwerfer für mehr Sicherheit auf dunklen, unbeleuchteten Straßen. Auch abseits der Straße im rauen Gelände können unsere Lightbars in Kombination mit unseren Frontbügeln, Überrollbügeln etc. vielseitig eingesetzt werden. Durch den Multivoltanschluss von 9-32 Volt bietet der Scheinwerfer einen weiten Fahrzeugverwendungsbereich für z.B. Off-Road Fahrzeuge, Jeep´s, Pickup´s, US-Cars, LKW´s, SUV´s, AT´s, Traktoren, Bagger, Boote, Motorräder etc. Das druckdichte Alugussgehäuse sorgt für Schutz gegen Wasser, Staub und Schmutz.Durch die jeweils seitlichen 3 LED´s, kann der Side Shooter das Licht bis zu einem Abstrahlwinkel von 180° verteilen.Bitte beachten Sie, dass nur Lightbars/Scheinwerfer die der europäischen ECE-Norm entsprechen im Straßenverkehr zugelassen sind. Alle anderen Scheinwerfer ohne ECE-Kennzeichnung sind nur als Arbeitsscheinwerfer zugelassen und dürfen im Straßenverkehr nicht verwendet werden. Unsere Scheinwerfer haben alle nötigen Prüfzeichen gemäß STVZO und sind 100% eintragungsfrei.Straßenzulassung/Rechtlich Hinweise:STVO Zulassung nahezu weltweit dank E-Prüfzeichen gemäß ECE-Regelung 149 als Fernscheinwerfer & Elektromagnetische Verträglichkeit zertifiziert nach ECE R10.Prüfzeichen: PL = Scheinwerfer mit KunststoffabdeckungPrüfzeichen: E9 = EU-Land, dass die Genehmigung erteilt hat. 9 = SpanienPrüfzeichen: R10 = FunkentstörungGemäß Zulassungsverordnung muss dieser Scheinwerfer paarweise verbaut werden

4" LED lightbar/headlamp with 20 CREE high-power leds. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Even off-road, in rough terrain, our Lightbars can be used in a variety of ways in combination with our front bars, roll bars, etc. Due to the multi-volt connection of 10-30 volts, the headlamp offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt.Please note that only lightbars/headlights that comply with the European ECE standard are approved for road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.Road approval/legal information:STVO approval almost worldwide thanks to E-mark according to ECE regulation 112 & electromagnetic compatibility certified according to ECE R10.Test mark: HR = High beam (bulb/LED)Mark of conformity: PL = Headlamp with plastic coverMark of conformity: E9 = EU country that has granted approval. 9 = SpainMark of conformity: R10 = Radio interference suppressionNote indication of the wattage:The rated power of the respective LED circuit boards is 3 watts. However, the wattage is never utilized by the headlight, but only about half. Otherwise the LED's would burn out at the higher temperatures or the LED's would discolor strongly. The LED's would therefore only have a significantly shorter lifetime. This results in the partially different measurement results between the nominal power and the real, measured wattage.For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

7" LED lightbar/headlamp with 40 CREE high-power leds. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Off-road in rough terrain, our Lightbars can also be used in a variety of ways in combination with our front bars, roll bars, etc.Due to the multi-volt connection of 10-30 volts, the headlamp offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt.Please note that only lightbars/headlights that comply with the European ECE standard are approved for road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.Road approval/legal information:STVO approval almost worldwide thanks to E-mark according to ECE regulation 112 & electromagnetic compatibility certified according to ECE R10.Test mark: HR = High beam (bulb/LED)Mark of conformity: PL = Headlamp with plastic coverMark of conformity: E9 = EU country that has granted approval. 9 = SpainMark of conformity: R10 = Radio interference suppressionNote indication of the wattage:The rated power of the respective LED circuit boards is 3 watts. However, the wattage is never utilized by the headlight, but only about half. Otherwise the LED's would burn out at the higher temperatures or the LED's would discolor strongly. The LED's would therefore only have a significantly shorter lifetime. This results in the partially different measurement results between the nominal power and the real, measured wattage.

20" LED lightbar/headlamp with 42 CREE high-power leds. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Off-road in rough terrain, our Lightbars can also be used in a variety of ways in combination with our front bars, roll bars, etc. Due to the multi-volt connection of 10-30 volts, the headlamp offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt. The two mounting points can be moved along the complete width of the Lightbar.Please note that only lightbars/headlights that comply with the European ECE standard are approved for use in road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.Road approval/legal information:STVO approval almost worldwide thanks to E-mark according to ECE regulation 112 & electromagnetic compatibility certified according to ECE R10.Test mark: HR = High beam (bulb/LED)Mark of conformity: PL = Headlamp with plastic coverMark of conformity: E9 = EU country that has granted approval. 9 = SpainMark of conformity: R10 = Radio interference suppressionNote indication of the wattage:The rated power of the respective LED circuit boards is 3 watts. However, the wattage is never utilized by the headlight, but only about half. Otherwise the LED's would burn out at the higher temperatures or the LED's would discolor strongly. The LED's would therefore only have a significantly shorter lifetime. This results in the partially different measurement results between the nominal power and the real, measured wattage.

38" LED lightbar/headlamp with 84 CREE high-power leds. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Off-road in rough terrain, our Lightbars can also be used in a variety of ways in combination with our front bars, roll bars, etc. Due to the multi-volt connection of 10-30 volts, the headlight offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt. The two mounting points can be moved along the complete width of the Lightbar.Please note that only lightbars/headlights that comply with the European ECE standard are approved for use in road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.Road approval/legal information:STVO approval almost worldwide thanks to E-mark according to ECE regulation 112 & electromagnetic compatibility certified according to ECE R10.Test mark: HR = High beam (bulb/LED)Mark of conformity: PL = Headlamp with plastic coverMark of conformity: E9 = EU country that has granted approval. 9 = SpainMark of conformity: R10 = Radio interference suppressionNote indication of the wattage:The rated power of the respective LED circuit boards is 3 watts. However, the wattage is never utilized by the headlight, but only about half. Otherwise the LED's would burn out at the higher temperatures or the LED's would discolor strongly. The LED's would therefore only have a significantly shorter lifetime. This results in the partially different measurement results between the nominal power and the real, measured wattage.

22" LED lightbar/headlamp with 40 CREE high-power LEDs á 3 Watt. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Our lightbars can also be used in a variety of ways off the road in rough terrain, in combination with our front bars, roll bars, etc. Due to the multi-volt connection of 10-30 volts, the headlight offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt.Please note that only lightbars/headlights that comply with the European ECE standard are approved for road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.Road approval/legal information:STVO approval almost worldwide thanks to E-mark according to ECE regulation 112 & electromagnetic compatibility certified according to ECE R10.Test mark: HR = High beam (bulb/LED)Mark of conformity: PL = Headlamp with plastic coverMark of conformity: E9 = EU country that has granted approval. 9 = SpainMark of conformity: R10 = Radio interference suppressionMark of conformity: A02 = position light function

12" LED light bar/headlamp with 20 CREE high-power LEDs á 3 Watt. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Our lightbars can also be used in a variety of ways off the road in rough terrain, in combination with our front bars, roll bars, etc. Due to the multi-volt connection of 10-30 volts, the headlight offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt.Please note that only lightbars/headlights that comply with the European ECE standard are approved for road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.Road approval/legal information:STVO approval almost worldwide thanks to E-mark according to ECE regulation 112 & electromagnetic compatibility certified according to ECE R10.Test mark: HR = High beam (bulb/LED)Mark of conformity: PL = Headlamp with plastic coverMark of conformity: E9 = EU country that has granted approval. 9 = SpainMark of conformity: R10 = Radio interference suppressionMark of conformity: A02 = position light function

20" LED lightbar/headlamp with 12 high-power LEDs á 7 Watt. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Our lightbars can also be used in a variety of ways off the road in rough terrain, in combination with our front bars, roll bars, etc. Due to the multi-volt connection of 10-30 volts, the headlight offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt.Please note that only lightbars/headlights that comply with the European ECE standard are approved for road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Alu-Schelle passend für alle Lampenbügel, Frontschutzbügel und Überrollbügel mit einem Rohrdurchmesser von 63mm bzw. 63,5mm. Ideal für die zusätzliche Befestigung von Scheinwerfern, Rundumleuchten etc... Sehr stabile Ausführung mit 50mm Breite und 105mm Gesamtlänge. Die Schelle hat eine Bohrung von 10mm, so können Sie die Scheinwerfer oder Rundumleuchten leicht befestigen. Zusammengehalten werden die beiden Teile der Halterung mit einer Innensechskantschlüssel. Der Gesamtdurchmesser der Schelle beträgt 65mm. Mit der im Lieferumfang enthaltenen biegsamen Kunststoffeinlage wird ein Durchmesser von 63,5mm erreicht. Die Montage der Schellen kann so erfolgen, dass die Leuchten leicht vor oder hinter dem Bügel stehen.Seit 40 Jahren bieten wir Off Road-Zubehör mit Service und Firmensitz in Deutschland an. Fragen Sie uns, um mehr zu unseren Artikeln zu erfahren. Wir helfen Ihnen gerne weiter.

Die schwarze Alu-Scheinwerfer-Schelle ist passend für alle Lampenbügel, Frontschutzbügel und Überrollbügel mit einem Rohrdurchmesser von 75-78 mm.Diese ist ideal für die zusätzliche Befestigung von Scheinwerfern, Rundumleuchten etc. Die Ausführung ist sehr stabil mit einer Breite von 50 mm . Die Schelle hat eine Bohrung von 14 mm, so können Sie die Scheinwerfer oder Rundumleuchten leicht befestigen. Zusammengehalten werden die beiden Teile der Halterung mit einer Innensechskantschraube. Der Gesamtdurchmesser der Schelle beträgt 78 mm. Im Lieferumfang ist eine durchsichtige, biegsame Kunststoffeinlage enthalten. Durch diese Einlage erreicht die Scheinwerfer-Schelle einen Rohrdurchmesser von 75-78 mm und hat einen sehr festen Halt auf dem Bügel.Die Kunststoffeinlage hat den zusätzlichen Vorteil, dass das Rohr vor Kratzern geschützt ist. Die Einlage wird zwischen die Schelle und das Rohr gelegt und verhindert somit den direkten Kontakt zwischen Rohr und Schelle.Seit 40 Jahren bieten wir Off Road-Zubehör mit Service und Firmensitz in Deutschland an. Fragen Sie uns, um mehr zu unseren Artikeln zu erfahren. Wir helfen Ihnen gerne weiter.

Clamp suitable for all lamp bars, bull bars and roll bars with a tube diameter of 60mm. Ideal for additional mounting of headlights, rotating beacons, etc... Very sturdy design with 50mm width and 105mm total length. The clamp has a hole of 10mm, so you can easily attach the headlights or rotating beacons. The two parts of the bracket are held together with a hexagon socket screw. The overall diameter of the clamp is 65mm. With the included flexible plastic insert, a diameter of 60.0mm is achieved. The clamp can be mounted so that the lights are slightly in front or behind the bracket.For 40 years we offer off road accessories with service and company headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Aluminum clamp suitable for all lamp bars, bull bars and roll bars with a tube diameter of 63mm or 63.5mm. Ideal for additional mounting of headlights, rotating beacons, etc... Very sturdy design with 50mm width and 105mm total length. The clamp has a hole of 10mm, so you can easily attach the headlights or rotating beacons. The two parts of the bracket are held together with an Allen key. The overall diameter of the clamp is 65mm. With the included flexible plastic insert, a diameter of 63.5mm is achieved. The clamps can be mounted so that the lights are slightly in front or behind the bracket.For 40 years we offer off road accessories with service and company headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Stainless steel clamp suitable for all lamp bars, bull bars and roll bars with a tube diameter of 41-43mm. Ideal for additional mounting of headlights, rotating beacons, etc... Very sturdy design with 50mm width. The clamp has a hole of Ø 13mm in both ends, so you can easily attach the headlights or rotating beacons.We have been providing off road accessories for 40 years with service and head office in Germany. Ask us to learn more about our items. We will be happy to help you.

Aluminum clamp suitable for all lamp bars, bull bars and roll bars with a tube diameter of 75-78mm. Ideal for additional mounting of headlights, rotating beacons, etc... Very sturdy design with 50mm width. The clamp has a hole of 14mm in both ends, so you can easily attach the headlights or rotating beacons.We have been providing off road accessories for 40 years with service and head office in Germany. Ask us to know more about our items. We will be happy to help you.

Black clamp suitable for our bull bars with oval tubes (Ø 89mm). Ideal for additional mounting of headlights, rotating beacons, etc... Very sturdy design with 50mm width. The clamp has an oval hole of 20x8mm in both ends, so you can easily attach the headlights or rotating beacons.We have been providing off road accessories for 40 years with service and headquarters in Germany. Ask us to know more about our items. We will be glad to help you.

Suitable for all lamp bars, front protection bars and roll bars with a tube diameter of 60mm to 76mm.The Rugged Ridge X-Clamp headlight clamp made of black aluminum is ideal for the additional attachment of headlights, beacons, etc. It uses the state-of-the-art Pivotal Fit technology and can be adjusted to the tube diameter by using the different screws included in the scope of delivery. Very stable design that enables extremely low-vibration installation of additional headlights.No other clamp on the market offers such a perfect fit for such a wide range of pipe diameters! The clamp has a 12mm hole, so you can easily attach the headlights or rotating beacons. If the clamp is fastened upside down, it can even be mounted on e.g. bull bars that are placed very close to the body.The headlights shown are not included!For 40 years we have been offering off-road accessories with service and headquarters in Germany. Ask us to learn more about our items. We're here to help.

Only suitable for vehicles without trailer hitchExtremely durable, black textured rear bumper in unmistakable "Black Stealth" look. The solid, black powder coated, 3mm thick, steel bumper offers your vehicle a brute look. The mounting is done at the original mounting points. Additional drilling is not necessary for this. The bumper has mounting holes for the original parking sensors. License plate lights with E-mark are also included. At both ends the bumper has a recessed step. The delivery is made with a GTÜ parts certificate, so the registration is no problem.Suitable for the following vehicles:Manufacturer: Ford Motor CompanyTrade name: Ford RangerVehicle type: 2ABYear of construction: 2012-2022With EC-BE-No.: e11*2007/46*0154*...,  e5*2007/46*0080*..For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Extremely robust, black-structured rear bumper in the unmistakable "Black Stealth" look. The solid 3mm thick steel bumper gives your vehicle a brute look. The bumper is mounted to the original mounting points, additional drilling is not necessary. The bumper has mounting holes for the original parking sensors. Number plate lights with E-mark are also included in the scope of delivery. The bumper has a recessed step at both ends. For vehicles with a trailer coupling, a coupling extension is necessary. This is included in the scope of delivery.Parts certificate:The bumper is delivered with a GTÜ parts certificate. For vehicles with a trailer coupling, the coupling extension supplied is required for installation. Coupling extensions are subject to registration. You will receive a GTÜ individual type approval for our coupling extension. We need the chassis number of your Ranger to issue the GTÜ individual type approval. Please therefore send us a copy of your vehicle registration document by e-mail after purchase. With both certificates, nothing stands in the way of registration.Suitable for the following vehicles:Manufacturer: Ford Motor CompanyTrade name: Ford RangerVehicle type: 2ABWith EC-BE-No.: e11*2007/46*0154*...,  e5*2007/46*0080*..Technical details AHK extension:D-value: 12.08max. drawbar load: 75 kgmax. permissible trailer load: 1975 kg. For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Only suitable for Double CabineThe highly polished stainless steel sidebars are not only a visual eye-catcher and make it easier to get into your vehicle, but also protect it from lateral damage. They are mounted on existing fastening points without drilling.TÜV parts certificate:Our sidebars are delivered with a german TÜV parts certificate. This means that the required registration is no longer a problem.Suitable for the following vehicles:Manufacturer: FordTrade name: Ranger, Ranger RaptorVehicle type: 2ABWith EC-BE-No.: e11*2007/46*0154.., e5*2007/46*0080..For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Only suitable for Double CabineThe black powder coated steel sidebars are not only a visual eye-catcher and make it easier to get into your vehicle, but also protect it from lateral damage. They are mounted on existing fastening points without drilling.TÜV parts certificate:Our sidebars are delivered with a german TÜV parts certificate. This means that the required registration is no longer a problem.Suitable for the following vehicles:Manufacturer: FordTrade name: Ranger, Ranger RaptorVehicle type: 2ABWith EC-BE-No.: e11*2007/46*0154.., e5*2007/46*0080..For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Only suitable for Double CabineThe black powder-coated running boards in the Shark design not only give your Pickup an aggressive look, but also provide additional protection and are helpful for easier entry, exit and loading of your car roof. Fitted to existing fixing points without drilling, the mounting brackets are already welded to the running boards.TÜV parts certificate:Our running boards are delivered with a german TÜV parts certificate. This means that the required registration is no longer a problem.Suitable for the following vehicles:Manufacturer: FordTrade name: Ranger, Ranger RaptorVehicle type: 2ABWith EC-BE-No.: e11*2007/46*0154.., e5*2007/46*0080..For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Only suitable for Double CabineThe black powder-coated Rock Rails in the unmistakable Black Stealth design not only give your Pickup an aggressive look, but also provide additional protection and are helpful for easier entry, exit and loading of your car roof. Fitted to existing fixing points without drilling, the mounting brackets are already welded to the running boards.TÜV parts certificate:Our Rock Rails are delivered with a german TÜV parts certificate. This means that the required registration is no longer a problem.Suitable for the following vehicles:Manufacturer: FordTrade name: Ranger, Ranger RaptorVehicle type: 2ABWith EC-BE-No.: e11*2007/46*0154.., e5*2007/46*0080..For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.