Black Rock Rails suitable for Jeep Wrangler JL 4-Door (2018-)

Very robust, massive black 3-part front bumper. 3mm steel bumper for a great look of your vehicle. The bumper can be mounted to original mounting points. The bumper has recesses for the original parking sensors and the original fog lights. Corresponding brackets for lights are included. The included bar can be mounted/demounted easily. In order to achieve more off-road mobility, the bumper corners can be removed without much effort. Tyre sizes up to 37" can be used without any problems, without touching the bumper. The included winch plate allows the use of all common winches with a hole pattern for fastening of : approx. 254 x 114 mm. (For hole dimensions please check out the sketch in the pictures).Please note that this bumper is only basecoated and must be painted or powder-coated before installation!Registration:This item will be deliverd without a certificate, material certificate or test report. When mounting the bumper the vehicle's type approval expires if not immediately a test, according to StVZO § 19, Abs. 2 in connection with §21 is carried out. After the technical modification. After the technical modification has been carried out, the vehicle must therefore be presented immediately to an officially recognised expert of a technical testing centre. Please check back with your authorities before purchase.For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

The black "W-TEC EXTREME", which we have elaborately manufactured, exclusively adopts the striking appearance of the beadlock rim. The rims are mounted with the original wheel nuts.We can offer you all tyre sizes listed in the TÜV parts certificate as complete wheels. Depending on the tyre size, there are different manufacturers and designs of the respective tyres. IMPORTANT:The conditions/of the TÜV parts certificate must be observed. Especially with tyre sizes from 295/70R17 onwards, please note that these may only be used in conjunction with, e.g. our height-lifting springs. You can call up the certificate at the bottom of this page under "Instructions for use".Delivery time: The complete wheels are made especially for you after receipt of payment, therefore the delivery time is approx. 14 days after receipt of payment. The delivery will be made by a forwarding agent. You will receive a call from the freight forwarder and can then arrange a delivery date.Rim description:One-piece light alloy wheelSize: 8,5x17 ET+30Bolt circle: 5x127Centre hole: 71,5mmWheel load: 900kgVehicle type:Suitable for the following vehicle:Manufacturer: FCA (USA)Type: JL (officially still JK)Designation: WranglerKW range: 147-213 and 200 + 65 (PHEV)Year of manufacture: 2018-ETG-NR.: e4*2001/116*0116*26...For 40 years we have been offering off road accessories with service and company headquarters in Germany. Ask us to find out more about our items. We will be happy to help you.

Black powder-coated, robust lamp bracket in the unmistakable "Black Rock" design. Mounting is done at existing mounting points without drilling, the mounting brackets and mounting material are included. Additional headlight brackets allow mounting of auxiliary headlights or lightbars. Additional openings, sealed with rubber plugs, allow internal cable routing of the additional headlights or lightbars.The delivery includes a GTÜparts certificate. This means that registration is no longer a problem!Suitable for the following vehicle:Manufacturer: FCA (USA)Designation: WranglerType: JL (officially still JK)Year of manufacture: 2018-ETG no.: e4*2001/116*0116*as of supplement 26 ...For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

One of the first and most fundamental modifications to the Jeep Wrangler is always a suspension lift. Groud clearance, driving comfort, safety and other modifications such as tyres, bumpers, roof rack, etc. are always made in coordination with the suspension. This is the only way to achieve the maximum driving experience.1. Eibach suspension lift springs 50-60mmTo give the look and performance of your vehicle the final touch, the Eibach Pro-Lift-Kit was developed. The offered lift springs were developed in cooperation with the suspension specialists of Eibach in Germany, adapted to the European road conditions and produced exclusively for Hansen Styling Parts. The springs were developed on a JL with mounted steel bumpers, winch, etc. and achieve a lifting of approx. 50mm. In series conditon, a lift of up to 60mm is possible.2. Bilstein B8 high-performance shock absorberDue to its extended design, the BILSTEIN B8 5100 fits perfectly with our Eibach lift springs for your Jeep Wrangler JL. The BILSTEIN monotube technology and the patented degressive vave system of the BILSTEIN B8 5100 are specially designed for these requirements. Whether on or off the road, it responds to changing road conditions without delay, providing directional stability, vehicle control and ride comfort.3. Coupling rods/stabilisersThe longer coupling rods, for the front and rear axles, keep the movement of the axle, e.g. in case of entanglement, within reasonable limits and improve driving stability considerably.4. Axle stops/Bump stopsThe axle stops, also known as bump stops, are installed within the spring travel and prevent the shock absorbers from botooming or bouncing when the wheels are submerged to the maximum extent in the wheel housing.5. Adjustable panhard bar - front axleThe reinforced adjustable panhard rod, for 2-6" lift kits, is mandatory. It ensures proper axle centering after the modification.6. Panhard bar bracket - rear axleThe panhard bar offset bracket is mounted to ensure perfect axle centering on lifted vehicles.7. Brake lineThe brake line must, normally, only be extended from approx. 3" lift on the Jeep Wrangler JL. The original brake line bracket has to be removed with our suspension lift.8. Trailing arm / Geo correction bracketGeometric correction brackets or trailing arm lowering is always useful if the caster, i.e. the angle at which the tyres are behind the vertical axis of rotation, is reduced due to the installed suspension lift. Among other things, this can cause the well-known death wobble. The geobrackets correct the angle back to the correct setting and improve th driving characteristics.We also offer this complete suspension lift kit with the geometric correction brackets in our shop!TÜV-certificateOThe delivery includes a TÜV certificate. You'll receive a suspension system that has been tested according to the current guidelines for pedestrian protection (2009/102/EWG) and is TÜV approved.The difference to other suspension systems:The springs and shock absorbers were manufactured and developed in cooperation with the suspension specialists from Eibach and Bilstein in Germany and adapted to European road conditions. The precise tuning of Eibach suspension springs and Bilstein shock absorbersreduces the uncontrolled movement of the Jeep Wrangler's high body. The approved BILSTEIN upside-down-technology ensures that the support and lateral forces are distributed over a large area and there is a significant increase in torsional rigidity in the connection between the wheel and the body. This significantly improves ride comfort on the road. The steering precision and the robustness of the vehicle are increased. This guarantees more vehicle control, safer handling as well as better traction.Vehicle:Car manufacturer: Jeep /FCATrade name: Wrangler Unlimited / Series: JLCar type: JK (only for 4-door)Year of construction: 11/2017-2020EG-BE-Nr.: e4*2001/116*0116*.. from supplement 26Technical information:Permissible axle load: max. 1406kgTechnically possible axle load: max. 1501kgNot for vehicles with level controlNot for vehicles with the trade name Wrangler with short wheel base - model 2-door & Hybrid model 4xe and Gladiator JT.​Warranty:Installation must be proven to have been carried out by a specialist garage or suitably qualified person. No liability is accepted for damages to the vehicle caused, e.g. by incomplete installation of all components or incorrect installation.