Hansen Styling Parts / Bilstein B6 suspension +40mm suitable for VW T5 (2003-2015) with clamp mounting

The offered daytime running light + fog lights is a vehicle-specific article. The daytime running light fits into the original cutouts of the fog lights. The mounting is done on the existing mounting points on the bumper.Our 2in1 daytime running lights are designed for vehicles with stock fog lights. If your vehicle does not have original fog lights, then you need not only a corresponding trim with cutout in the front for the fog lights but also a daytime running light set with a separate on and off switch for the fog lights.Please select the appropriate set in our store!The delivery of the daytime running lights is done with a H11 plug (the picture above shows a HB4 plug). This plug is suitable for some vehicles (such as partially VW, Audi, Seat, etc....). If this is not suitable for your model, our H11 plug must be replaced by a vehicle-specific plug. This is unfortunately not offered by us. You also have the option to disconnect the plugs and connect the cables.Vehicles with Can-Bus-System!The vehicles of the newer generation are nowadays equipped with so-called Can-Bus or LIN-Bus systems, which check the light, display and turn signal function by means of a low, permanent test current. So that after the installation of our daytime running lights+fog lights and the omission of the standard fog lights no error message is displayed, we can supply together with the lights a load resistor, which is connected to the connection cables of the fog lights. So you can install the set on your vehicle without any error. Please notify us after your purchase if your vehicle is equipped with a CanBus system.Approval Regulations:Europe-wide approval thanks to ECE, E11, R87 and RL designation.Thanks to the E- and F-approval marks on the lens, the article is 100% road legal andapproved in road traffic and registration-free.The daytime running lights do not have to be entered in the vehicle documents.Thanks to the test marks on the diffusing lens of the daytime running lights, no documents (such as test reports, ABE, etc.) need to be carried with the vehicle documents.We have been offering off road accessories with service and company headquarters in Germany for 40 years. Ask us to learn more about our items. We will be happy to help you.

Not suitable for "Panamericana" and Sportline or vehicles with Sportline bumperBullbar made of robust, highly polished stainless steel tube with a diameter of 76mm. Manufactured according to the current EU guidelines for pedestrian protection. Thanks to the EC type approval included in the scope of delivery, neither the bullbar nor the skidplate need to be entered in the vehicle documents. The document only has to be carried.Suitable for the following vehicles:Manufacturer: Volkswagen AGTrade name: Transporter, Caravelle, Multivan, Startline, Estate, California, BeachVehicle type: 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0With EC-BE No.: e1*2001/116*0220*19, e1*2001/116*0220*20, e1*2001/116*0286*.., e1*2001/116*0218*.., e1*2001/116*0289*10, e1*2001/116*0289*11, L148*.., L225*.., e1*2007/46*0130*..For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Not suitable for "Panamericana" and Sportline or vehicles with Sportline bumper.Bullbar made of robust, black powder-coated steel tube with a diameter of 76mm. Manufactured according to the current EU guidelines for pedestrian protection. Thanks to the EC type approval included in the scope of delivery, neither the bullbar nor the skidplate need to be entered in the vehicle documents. The document only has to be carried.Suitable for the following vehicles:Manufacturer: Volkswagen AGTrade name: Transporter, Caravelle, Multivan, Startline, Estate, California, BeachVehicle type: 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0With EC-BE No.: e1*2001/116*0220*19, e1*2001/116*0220*20, e1*2001/116*0286*.., e1*2001/116*0218*.., e1*2001/116*0289*10, e1*2001/116*0289*11, L148*.., L225*.., e1*2007/46*0130*..For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Not suitable for "Panamericana" and Sportline or vehicles with Sportline bumper.Bullbar made of robust, highly polished stainless steel tube with a diameter of 76mm. Manufactured according to the current EU guidelines for pedestrian protection. Thanks to the EC type approval included in the scope of delivery, the bullbar don´t need to be entered in the vehicle documents. The document only has to be carried.Suitable for the following vehicles:Manufacturer: Volkswagen AGTrade name: Transporter, Caravelle, Multivan, Startline, Estate, California, BeachVehicle type: 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0With EC-BE No.: e1*2001/116*0220*19, e1*2001/116*0220*20, e1*2001/116*0286*.., e1*2001/116*0218*.., e1*2001/116*0289*10, e1*2001/116*0289*11, L148*.., L225*.., e1*2007/46*0130*..For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

Not suitable for "Panamericana" and Sportline or vehicles with Sportline bumper.Bullbar made of robust, black powder-coated steel tube with a diameter of 76mm. Manufactured according to the current EU guidelines for pedestrian protection. Thanks to the EC type approval included in the scope of delivery, the bullbar don´t need to be entered in the vehicle documents. The document only has to be carried.Suitable for the following vehicles:Manufacturer: Volkswagen AGTrade name: Transporter, Caravelle, Multivan, Startline, Estate, California, BeachVehicle type: 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0With EC-BE No.: e1*2001/116*0220*19, e1*2001/116*0220*20, e1*2001/116*0286*.., e1*2001/116*0218*.., e1*2001/116*0289*10, e1*2001/116*0289*11, L148*.., L225*.., e1*2007/46*0130*..For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

The highly polished stainless steel sidebars are not only a visual eye-catcher and make it easier to get into your vehicle, but also protect it from lateral damage. They are mounted on existing fastening points without drilling. Only small pieces have to be cut out of the splash guards during installation.TÜV parts certificate:Our sidebars are delivered with a german TÜV parts certificate. This means that the required registration is no longer a problem.Suitable for the following vehicles:Manufacturer: VWTrade name: T5Vehicle type: 7HM, 7HC, 7HCA, 7HMA, 7HK, 7HKX0, 7J0With EC-BE-No.: e1*2001/116*0218*.., e1*2001/116*0220*.., e1*2001/116*0286*.., e1*2001/116*0289*.., L 148, L225, e1*2007/46*0130*..For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

The black powder coated steel sidebars are not only a visual eye-catcher and make it easier to get into your vehicle, but also protect it from lateral damage. They are mounted on existing fastening points without drilling. Only small pieces have to be cut out of the splash guards during installation.TÜV parts certificate:Our sidebars are delivered with a german TÜV parts certificate. This means that the required registration is no longer a problem.Suitable for the following vehicles:Manufacturer: VWTrade name: T5Vehicle type: 7HM, 7HC, 7HCA, 7HMA, 7HK, 7HKX0, 7J0With EC-BE-No.: e1*2001/116*0218*.., e1*2001/116*0220*.., e1*2001/116*0286*.., e1*2001/116*0289*.., L 148, L225, e1*2007/46*0130*..For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

The highly polished stainless steel sidebars are not only a visual eye-catcher and make it easier to get into your vehicle, but also protect it from lateral damage. They are mounted on existing fastening points without drilling.TÜV parts certificate:Our sidebars are delivered with a german TÜV parts certificate. This means that the required registration is no longer a problem.Suitable for the following vehicles:Manufacturer: VWTrade name: T5Vehicle type: 7HM, 7HC, 7HCA, 7HMA, 7HK, 7HKX0, 7J0With EC-BE-No.: e1*2001/116*0218*.., e1*2001/116*0220*.., e1*2001/116*0286*.., e1*2001/116*0289*.., L 148, L225For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

The black powder coated steel sidebars are not only a visual eye-catcher and make it easier to get into your vehicle, but also protect it from lateral damage. They are mounted on existing fastening points without drilling.TÜV parts certificate:Our sidebars are delivered with a german TÜV parts certificate. This means that the required registration is no longer a problem.Suitable for the following vehicles:Manufacturer: VWTrade name: T5Vehicle type: 7HM, 7HC, 7HCA, 7HMA, 7HK, 7HKX0, 7J0With EC-BE-No.: e1*2001/116*0218*.., e1*2001/116*0220*.., e1*2001/116*0286*.., e1*2001/116*0289*.., L 148, L225For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

To give the look and the performance of your Bulli the final touch, we have developed with the specialists from H&R the height-adjustment springs. With our height-adjustment springs, your vehicle gets up to 40mm more ground clearance (depending on the vehicle version). The use of the raising springs is possible with both standard and aftermarket shock absorbers. The springs are 100% Made in Germany and have a TÜV parts certificate for easy registration in the vehicle documents.Vehicle type VW T5:Vehicle manufacturer : Volkswagen VW / 0603Trade name: VW T6 (Multivan, Truck, California, Transporter)Vehicle type: 7HK, 7HKX0, 7J0, 7HM, 7HMA, 7HC, 7HCAYear of construction: 2003-2015Type approval No.: L148, L225, e1*2007/46*0130*.., e1*2001/116*0218*.., e1*2001/116*0289*.., e1*2001/116*0220*.., e1*2001/116*0286*..Vehicle type VW T6:Vehicle manufacturer : Volkswagen VW / 0603Trade name:VW T5 (station wagon, Multivan, California/ - Beach, Transporter)Vehicle type: 7HC, 7HMA, 7J0Year of manufacture: 2015-2019Type approval No.: e1*2001/116*0220*36-54, e1*2001/116*0289*25-43, e1*2001/46*0130*16-31We have been providing off road accessories for 40 years with service and headquarters in Germany. Ask us to know more about our items. We will be glad to help you.

You don't want to compromise on performance or comfortThe BILSTEIN B6 gas pressure shock absorber is for anyone who doesn't want to compromise on performance or ride comfort, even under increased load.The BILSTEIN B6 shock absorber offers you improved handling characteristics in every situation. The precise tuning reduces the uncontrolled movements of the high body, increases steering precision and the load-bearing capacity of the chassis, guarantees more vehicle control and therefore safer handling and better traction. Heavy loads, trailers or bad roads in general are a challenge for shock absorbers. The BILSTEIN B6 shock absorber offers an improved standard replacement for such high demands. Even without raising the suspension, you achieve improved vehicle dynamics for comfortable driving behaviour on and off the road.Suitabel for the following vehicles:ModelrangeYear of construction from - toT5 Bus (7HB, 7HJ, 7EB, 7EJ)04/2003 - 08/2015T5 California (7EC, 7EF, 7EG, 7HF, 7HC)04/2003 - 08/2015T5 Fahrgestell (7JD, 7JE, 7JL, 7JY, 7JZ, 7FD)04/2003 - 08/2015T5 Kasten (7HA, 7HH, 7EA, 7EH)04/2003 - 08/2015T5 Multivan (7HM, 7HN, 7HF, 7EF, 7EM, 7EN)04/2003 - 08/2015For more than 40 years, we have been offering accessories for pickups, off-road vehicles, lorries and motorhomes from our headquarters in Germany. Benefit not only from high quality, but also from our short delivery times, various payment options and our outstanding customer service. We are available for our customers by telephone. Ask us to find out more about our products. We will be happy to help you.

You don't want to compromise on performance or comfortThe BILSTEIN B6 gas pressure shock absorber is for anyone who doesn't want to compromise on performance or ride comfort, even under increased load.The BILSTEIN B6 shock absorber offers you improved handling characteristics in every situation. The precise tuning reduces the uncontrolled movements of the high body, increases steering precision and the load-bearing capacity of the chassis, guarantees more vehicle control and therefore safer handling and better traction. Heavy loads, trailers or bad roads in general are a challenge for shock absorbers. The BILSTEIN B6 shock absorber offers an improved standard replacement for such high demands. Even without raising the suspension, you achieve improved vehicle dynamics for comfortable driving behaviour on and off the road.Suitabel for the following vehicles:ModelrangeYear of construction from - toT5 Bus (7HB, 7HJ, 7EB, 7EJ)04/2003 - 08/2015T5 California (7EC, 7EF, 7EG, 7HF, 7HC)04/2003 - 08/2015T5 Fahrgestell (7JD, 7JE, 7JL, 7JY, 7JZ, 7FD)04/2003 - 08/2015T5 Kasten (7HA, 7HH, 7EA, 7EH)04/2003 - 08/2015T5 Multivan (7HM, 7HN, 7HF, 7EF, 7EM, 7EN)04/2003 - 08/2015For more than 40 years, we have been offering accessories for pickups, off-road vehicles, lorries and motorhomes from our headquarters in Germany. Benefit not only from high quality, but also from our short delivery times, various payment options and our outstanding customer service. We are available for our customers by telephone. Ask us to find out more about our products. We will be happy to help you.

To give the look and the performance of your Bulli the final touch, we have developed with the specialists from H&R the height-adjustment springs. With our height-adjustment springs, your vehicle gets up to 40mm more ground clearance (depending on the vehicle version). The use of the raising springs is possible with both standard and aftermarket shock absorbers. The springs are 100% Made in Germany and have a TÜV parts certificate for easy registration in the vehicle documents.Vehicle type VW T5:Vehicle manufacturer : Volkswagen VW / 0603Trade name: VW T6 (Multivan, Truck, California, Transporter)Vehicle type: 7HK, 7HKX0, 7J0, 7HM, 7HMA, 7HC, 7HCAYear of construction: 2003-2015Type approval No.: L148, L225, e1*2007/46*0130*.., e1*2001/116*0218*.., e1*2001/116*0289*.., e1*2001/116*0220*.., e1*2001/116*0286*..Vehicle type VW T6:Vehicle manufacturer : Volkswagen VW / 0603Trade name:VW T5 (station wagon, Multivan, California/ - Beach, Transporter)Vehicle type: 7HC, 7HMA, 7J0Year of manufacture: 2015-2019Type approval No.: e1*2001/116*0220*36-54, e1*2001/116*0289*25-43, e1*2001/46*0130*16-31As a leading manufacturer of high-performance shock absorbers, KONI follows a simple principle in the development of its products: to meet the diverse requirements and demands on car shock absorbers with highly developed technical solutions. The declared goals are to sustainably improve driving behaviour in the area of original equipment replacement (AM), or to guarantee the best possible driving behaviour as an original equipment manufacturer (OE) right from the start.KONI with an intelligent solutionKONI car shock absorbers with the innovative Special Technology have been specially developed for everyday cars, trucks and SUVs. In a unique way they combine maximum road holding and comfort. The Special Technology is a purely mechanical solution and does not require any electronic components. This makes them the first choice when it comes to solving the eternal compromise between comfort and road holding.We have been providing off road accessories for 40 years with service and headquarters in Germany. Ask us to know more about our items. We will be glad to help you.

As a leading manufacturer of high-performance shock absorbers, KONI follows a simple principle in the development of its products: to meet the diverse requirements and demands on car shock absorbers with highly developed technical solutions. The declared goals are to sustainably improve driving behaviour in the area of original equipment replacement (AM), or to guarantee the best possible driving behaviour as an original equipment manufacturer (OE) right from the start.KONI with an intelligent solutionKONI car shock absorbers with the innovative Special Technology have been specially developed for everyday cars, trucks and SUVs. In a unique way they combine maximum road holding and comfort. The Special Technology is a purely mechanical solution and does not require any electronic components. This makes them the first choice when it comes to solving the eternal compromise between comfort and road holding.

As a leading manufacturer of high-performance shock absorbers, KONI follows a simple principle in the development of its products: to meet the diverse requirements and demands on car shock absorbers with highly developed technical solutions. The declared goals are to sustainably improve driving behaviour in the area of original equipment replacement (AM), or to guarantee the best possible driving behaviour as an original equipment manufacturer (OE) right from the start.KONI with an intelligent solutionKONI car shock absorbers with the innovative Special Technology have been specially developed for everyday cars, trucks and SUVs. In a unique way they combine maximum road holding and comfort. The Special Technology is a purely mechanical solution and does not require any electronic components. This makes them the first choice when it comes to solving the eternal compromise between comfort and road holding.

As a leading manufacturer of high-performance shock absorbers, KONI follows a simple principle in the development of its products: to meet the diverse requirements and demands on car shock absorbers with highly developed technical solutions. The declared goals are to sustainably improve driving behaviour in the area of original equipment replacement (AM), or to guarantee the best possible driving behaviour as an original equipment manufacturer (OE) right from the start.KONI with an intelligent solutionKONI car shock absorbers with the innovative Special Technology have been specially developed for everyday cars, trucks and SUVs. In a unique way they combine maximum road holding and comfort. The Special Technology is a purely mechanical solution and does not require any electronic components. This makes them the first choice when it comes to solving the eternal compromise between comfort and road holding.

To add the finishing touches to the look and performance of your vehicle, Eibach Pro-Spacers have been developed. Give your vehicle a wider, more stable track - quickly and easily. Wheel spacers are the ideal addition when the standard or accessory wheel lacks the final visual kick. With the matching Eibach Pro-Spacer, your vehicle gets an even sportier look because the wheels and tyres really fill out the wheel arches this way. The precise adjustment of the track width not only improves the appearance of your vehicle, but also optimises the handling and the rolling tendency. Simply use the help video to determine the correct dimensions and then order the appropriate wheel spacers:You can see the correct installation of the wheel spacers here:Suitable for the following vehicles:Manufacturer: VW (D) / 0603Description: T5 Multivan, -Kombi, -California, -Shuttle, -Transporter, -Kasten, -PritscheType: 7 HM, 7 HC, 7 HCA, 7 HMA, 7 HK, 7 HKX0, 7 J0 Year of construction: 04/2003-08/2015ETG-No.: e1*2001/116*0218*.., e1*2001/116*0220*.., e1*2001/116*0286*.., e1*2001/116*0289*.., L 148, e1*2007/46*0130*.., L 225For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.

To add the finishing touches to the look and performance of your vehicle, Eibach Pro-Spacers have been developed. Give your vehicle a wider, more stable track - quickly and easily. Wheel spacers are the ideal addition when the standard or accessory wheel lacks the final visual kick. With the matching Eibach Pro-Spacer, your vehicle gets an even sportier look because the wheels and tyres really fill out the wheel arches this way. The precise adjustment of the track width not only improves the appearance of your vehicle, but also optimises the handling and the rolling tendency. Simply use the help video to determine the correct dimensions and then order the appropriate wheel spacers:You can see the correct installation of the wheel spacers here:Suitable for the following vehicles:Manufacturer: VW (D) / 0603Description: T5 Multivan, -Kombi, -California, -Shuttle, -Transporter, -Kasten, -PritscheType: 7 HM, 7 HC, 7 HCA, 7 HMA, 7 HK, 7 HKX0, 7 J0 Year of construction: 04/2003-08/2015ETG-No.: e1*2001/116*0218*.., e1*2001/116*0220*.., e1*2001/116*0286*.., e1*2001/116*0289*.., L 148, e1*2007/46*0130*.., L 225For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.