Stainless steel frontbar suitable for Mercedes-Benz Sprinter (2018-)

Aluminum clamp suitable for all lamp bars, bull bars and roll bars with a tube diameter of 63mm or 63.5mm. Ideal for additional mounting of headlights, rotating beacons, etc... Very sturdy design with 50mm width and 105mm total length. The clamp has a hole of 10mm, so you can easily attach the headlights or rotating beacons. The two parts of the bracket are held together with an Allen key. The overall diameter of the clamp is 65mm. With the included flexible plastic insert, a diameter of 63.5mm is achieved. The clamps can be mounted so that the lights are slightly in front or behind the bracket.For 40 years we offer off road accessories with service and company headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Suitable for all lamp bars, front protection bars and roll bars with a tube diameter of 60mm to 76mm.The Rugged Ridge X-Clamp headlight clamp made of black aluminum is ideal for the additional attachment of headlights, beacons, etc. It uses the state-of-the-art Pivotal Fit technology and can be adjusted to the tube diameter by using the different screws included in the scope of delivery. Very stable design that enables extremely low-vibration installation of additional headlights.No other clamp on the market offers such a perfect fit for such a wide range of pipe diameters! The clamp has a 12mm hole, so you can easily attach the headlights or rotating beacons. If the clamp is fastened upside down, it can even be mounted on e.g. bull bars that are placed very close to the body.The headlights shown are not included!For 40 years we have been offering off-road accessories with service and headquarters in Germany. Ask us to learn more about our items. We're here to help.

22" LED lightbar/headlamp with 40 CREE high-power LEDs á 3 Watt. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Our lightbars can also be used in a variety of ways off the road in rough terrain, in combination with our front bars, roll bars, etc. Due to the multi-volt connection of 10-30 volts, the headlight offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt.Please note that only lightbars/headlights that comply with the European ECE standard are approved for road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.Road approval/legal information:STVO approval almost worldwide thanks to E-mark according to ECE regulation 112 & electromagnetic compatibility certified according to ECE R10.Test mark: HR = High beam (bulb/LED)Mark of conformity: PL = Headlamp with plastic coverMark of conformity: E9 = EU country that has granted approval. 9 = SpainMark of conformity: R10 = Radio interference suppressionMark of conformity: A02 = position light function

12" LED light bar/headlamp with 20 CREE high-power LEDs á 3 Watt. Uniformly diffused, super-bright beam provides more safety on dark, unlit roads. Our lightbars can also be used in a variety of ways off the road in rough terrain, in combination with our front bars, roll bars, etc. Due to the multi-volt connection of 10-30 volts, the headlight offers a wide range of vehicle applications, e.g. off-road, jeep, pickup, US cars, truck, SUV, ATV, tractor, excavator, boat, motorbike, etc. Pressure-tight cast aluminium housing provides protection against water, dust and dirt.Please note that only lightbars/headlights that comply with the European ECE standard are approved for road traffic. All other headlights without ECE marking are only approved as worklights and may not be used in road traffic. Our headlights have all the necessary test marks according to STVZO and are 100% registration-free.Road approval/legal information:STVO approval almost worldwide thanks to E-mark according to ECE regulation 112 & electromagnetic compatibility certified according to ECE R10.Test mark: HR = High beam (bulb/LED)Mark of conformity: PL = Headlamp with plastic coverMark of conformity: E9 = EU country that has granted approval. 9 = SpainMark of conformity: R10 = Radio interference suppressionMark of conformity: A02 = position light function

Newly developed LED auxiliary headlight with switchable LED ring as position light. A visual eye-catcher due to the large black aluminum housing. Powerful new reflector that produces a much better light pattern. Minimal energy consumption due to the use of LED's. These LED's have an extremely long life of about 30,000 hours. The housing is completely made of aluminum. The reflector is made of high quality plastic, which is equipped with 6 high power LED's. The luminosity corresponds to approx. 5400 lumens. The color temperature is 6000 Kelvin. This corresponds approximately to the brightness of daylight. The rubber-mounted stainless steel base ensures low vibration mounting. The headlight can be operated with 12 volts as well as with 24 volts.We have been providing off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

This headlight bracket is not only a visual eye-catcher, but also serves in conjunction with auxiliary headlights (headlights shown are not included) active safety on the road. Universal fitting lamp bracket for mounting on the roof of the truck. We have also attached a sketch with the dimensions of the headlight bracket. Please check the dimensions to see if the headlight bracket will fit on your truck.We have been providing off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

This headlight bracket is not only a visual eye-catcher, but also serves in conjunction with auxiliary headlights (headlights shown are not included) active safety on the road. Universal fitting lamp bracket for mounting on the roof of the truck. We have also attached a sketch with the dimensions of the headlight bracket. Please check the dimensions to see if the headlight bracket will fit on your truck.We have been providing off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

This headlight bracket is not only a visual eye-catcher, but also serves in conjunction with auxiliary headlights (headlights shown are not included) active safety on the road. Universal fitting lamp bracket for mounting on the roof of the truck. We have also attached a sketch with the dimensions of the headlight bracket. Please check the dimensions to see if the headlight bracket will fit on your truck.We have been providing off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Newly developed LED spotlight incl. LED parking light ring. Due to the multi-voltage connection, this headlight can be used equally for cars, SUVs and trucks. Approved as a driving lamp incl. parking light ring. All required approval marks are present on the lens. Rugged and durable stainless steel housing.We have been offering off road accessories for 40 years with service and company headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

Scope of delivery:4 pieces with a length of each 200 cm20 mm (the vehicle is widened by 20 mm per fender / 40 mm per axle)german TÜV Süd test report (TÜV Süd, Westendstr. 199, 80686 Munich, test report No. 16-00074-CP-BWG)TÜV registration:You will receive a TÜV Süd test report from us with the delivery of the extensions. The entry of the fender flares is not necessary, this is also in the report, but we know from experience and from many customer messages that the law enforcement officers like to see such a TÜV confirmation again. Only then will there really be no trouble with the inspection service and that's why we had a TÜV Süd report drawn up.Assembly:the ambient temperature and the temperature of the components or mounting surface must be a minimum of 20 ° Celsius during assembly and at least 24 hours afterwardsthe surfaces on the vehicle for assembly must be rust-free, smooth, thoroughly cleaned and free of greaseAfter removing the carrier film, the widening must be pressed against the surface for approx. 1 minute with high and even pressurethe ends of the fender flares can be adapted to the vehicle look with a sharp carpet knifewe recommend that you leave the vehicle for at least 6 hours after installationthe final strength of the glued areas is only reached after 48 hoursplease do not wash the vehicle for at least 48 hoursFor some widths, some mounting situations, structured surfaces or if the installation instructions cannot be followed, additional fastening with e.g. Self-tapping screws or body adhesive requiredFor 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.